I replaced the stock wing with a STi replica. It cost me 305$ plus shipping. Pretty sweat deal if you ask me. I've always wanted this wing, and it just had to happen.
Dunk hand in dirty grease.
Remove 4 nuts holding the spoiler in place.
Remove grounding wires.
Damn dirty nut...
Compared to others.
Removing stock wing.
Stock wing removed.
Follow installation procedure.
Use phillips to screw in 6 bolts.
Do not stick figure into hole... Your knuckle will probably get stuck.
Using t-strips place them over the screw holes (I don't have a shot before I set the spoiler on the car). After you've placed the spoiler on the car, tape down the t-strips.
Remove the spoiler, while ensuring the stripes stay down.
Set guides, for drilling.
Commence drilling with 1/16th inch bit, and again with 1/8th.
Using a rag, clear metal shavings.
Ready for placement.
I'm surprised this required drilling, I would have thought they'd just mount the wing to the stock holes, seeing as it hugs t...
Sweet!! Love it.
Copyright (c) 2015 project-build.net. All rights reserved.